Using The Lan; Using The Wireless Lan - Getac V200 User Manual

Using the LAN

The internal 10/100/1000Base-T LAN (Local Area Network) module allows
you to connect your computer to a network. It supports data transfer rate up
to 1000 Mbps.
To connect the network cable to the LAN module, connect one end of the
LAN cable to the RJ-45 connector on the computer and the other end to the
network hub.

Using the Wireless LAN

The WLAN module of your computer supports IEEE 802.11a/g/n.
Turning On/Off the WLAN Radio
NOTE:
The FAA (Federal Aviation Agency) has deemed it unsafe to operate

wireless devices in aircraft as this may interfere with flight safety.
Remember to turn off wireless LAN when using your computer in the
airplane.
Wi-Fi 5G Band Statement: The device for operation in the band

5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
For body worn operation, this device has been tested and meets FCC RF

exposure guidelines when positioned at 0 cm from the body. SAR
(Specific Absorption Rate) of the WLAN transmitter is 0.376W/kg (1g).
To turn on or off the wireless radio (including the WLAN radio), press the
button located on the front of your computer or spress Fn+F1. A small
window pops up on the screen to indicate the status.
Operating Your Computer
2-19