Startup Problems - Getac B320 User Manual

Distorted sound is produced.
Make sure that the volume control is not set too high or too low. In most

cases, a high setting can cause the audio electronics to distort the sound.
The sound system does not record.
Adjust the playback or recording sound levels.

The external microphone or audio device does not work.
Make sure that the microphone is connected to the proper connector on

the computer.
 Click the speaker symbol on the taskbar and check the Windows volume
control.
Check the volume control of your computer.


Startup Problems

When you turn on the computer, it does not seem to respond.
Make sure that either the AC adapter is connected or the battery has

power.
For models with the hard disk drive heater option: When turning on the

computer in an extremely low temperature environment, the computer
will heat up the hard disk before starting up. The HDD Heater indicator
( ) lights amber to indicate the heater is on. Wait till the heating is
finished. However, if external AC power is not available and the
remaining battery power is too low for the heating to complete, the
computer may not start up. In case the computer fails to start up, turn
off the computer and leave it in room temperature for about an hour
before trying to turn it on again.
When you turn on the computer, it stops after POST.
 Restart your computer.
8-9
Troubleshooting