Wideband Video (300 Mhz) I/O Boards; Applicability Notice - AMX Optima Instruction Manual

Wideband Video (300 MHz) I/O Boards

Applicability Notice

FIG. 26
Wideband video I/O boards
This chapter pertains to Optima wideband video (300 MHz) input/output boards contained in
pre-engineered systems and custom systems. The table below provides information on the types of
wideband video boards and their numbers.
Optima systems (pre-engineered and custom) with wideband boards generally contain multiples of the
boards listed below for routing the separate components of a component video signal, e.g., routing
the R, G, and B in an RGBHV signal. (Hi-Z sync boards or HV Hi-Z sync boards can be used in a
wideband system to route horizontal and vertical sync signals.)
Wideband Video (300 MHz) I/0 Boards
Note: Specifications for the following boards are listed on page 48.
Configuration
Optima Instruction Manual
Board Part #
8x8
16x16
16x24
20x4
20x20
24x4
24x16
36x4
Wideband Video (300 MHz) I/O Boards
FG1046-437
FG1046-482
FG1046-542
FG1046-467
FG1046-410
FG1046-503
FG1046-428
FG1046-419
47