Product Notes - AMX Optima Instruction Manual

S/PDIF (coaxial)
TosLink (optical)
Four S/PDIF plus four TosLink
RGBHV+Stereo
(RJ-45 Connectors)
Note: CatPro boards are used in conjunction with CatPro RX (Receiver) FG1010-48-01.
Optima Expansion Boards
If you ordered Optima expansion boards (which add additional functionality to the system), they were
installed at the factory. For information on expansion boards, including connectors and cabling/wiring
directions, see the specific expansion board's chapter in this manual.
Board Type
APWeb (TCP/IP) – 3 RU only
XNNet – 2 RU only

Product Notes

An Optima Distribution Matrix can stand alone or be linked as part of a larger system, including any
other AMX AutoPatch products that are XNNet compatible. The Optima is available in a variety of input
to output configuration sizes and can contain audio, video, and data boards in the same enclosure.
An Optima system can fit in a broad range of analog and digital environments and is controllable from a
variety of sources (see page 15).
Note: Because the Optima Distribution Matrix is available in several models and various
configurations, the illustrations in this manual may differ from the model(s) you purchased.
Optima Features
Optima Instruction Manual
Optima Digital Audio I/O Boards and Part #
Signal
Optima CatPro I/O Boards and Part #
Signal
Optima Expansion Boards and Part #
Ultra-Flat Response – bandwidth curve measured at a tight ±3 dB
High bandwidth-linearity and low crosstalk
Superior video crosstalk specifications ensure signal isolation and security
System self-diagnostics
Supports full Device Discovery through AMX's AutoPatch Duet module (firmware v1.4.0 or
higher is required)
Ability to mix a variety of video, audio, and data boards in a single enclosure
Virtual matrices (levels) / groupings
Audio breakaway to route audio-follow-video, video, or audio alone
RJ-45 Ethernet (Enc Link) port for linking enclosures
Global presets
Configuration
8x8 FG1046-458
8x8 FG1046-455
8x8 FG1046-461
Configuration
4x8 FG1046-581
8x8 FG1046-575
Part #
FG1046-313
SA1046-310
Overview and General Specifications
Part #
Part #
9