Hdmi I/O Board; Applicability Notice - AMX Optima Instruction Manual

Distribution matrix
Hide thumbs Also See for Optima:
Table of Contents

Advertisement

HDMI I/O Board

Applicability Notice

FIG. 40
HDMI I/O board in pre-engineered system AVS-OP-0808-JD0
This board chapter pertains to the Optima HDMI I/O (Input/Output) board in pre-engineered system
AVS-OP-0808-JD0. The board can also be ordered as part of a custom system.
8x8 HDMI Pre-engineered System
Note: Specifications for the 8x8 HDMI board in this system are on page 70 through page 78.
HDMI I/O Board
Note: Specifications for the following board are on page 70 through page 78.
The HDMI I/O board is designed to route high-resolution HDMI or DVI signals with or without HDCP
(High-bandwidth Digital Content Protection). DVI signals must be, single-link DVI signals and are
connected only with the use of a cable adapter. Destination devices with either DVI-I or single-link
DVI-D connectors are supported.
The HDMI I/O board is HDMI 1.3a compatible and HDCP 1.3 compatible. The board features
AMX HDCP InstaGate
supports computer video up to 1900x1200 and HDTV up to 1080p. The connectors also support
embedded audio both linear PCM (stereo audio) and non-linear PCM (Dolby 5.1 and DTS 5.1).
The boards are pre-loaded with the most common EDID settings to ensure proper functionality with
source devices. The EDID Programmer (see page 155) allows specific display EDID settings to be
custom loaded on each input if desired and is available on the AMX AutoPatch CD and at
www.amx.com (search for EDID Library).
Signals may only be routed from the inputs on a board to the outputs on the same board because each
board has its own switching matrix.
* InstaGate
system. HDCP latency and interruptions are typically experienced when High-Bandwidth Digital
Content Protection (HDCP) authenticates HDMI or DVI source and destination devices. InstaGate
technology effectively "opens the gate" by pre-authorizing connected source and destination devices to
satisfy HDCP authentication.
Optima Instruction Manual
Configuration
8x8
Configuration
8x8
®
technology* for low-latency switching of HDCP protected content and
®
technology significantly reduces the HDCP latency and interruptions on all displays in a
System Sales #
AVS-OP-0808-JD0
Boards Sales #
AVS-OP-0808-HDMI-2S
HDMI I/O Board
System Part #
FGP46-0808-JD0
Board Part #
FG1046-614
®
69

Advertisement

Table of Contents
loading

Table of Contents