Overview And General Specifications; Applicability Notice - AMX Optima Instruction Manual

Overview and General Specifications

Applicability Notice

The information in this manual applies to the following Optima pre-engineered systems, custom
systems, input/output (I/O) boards, and expansion boards:
Optima Pre-Engineered Systems
All Optima pre-engineered systems are numbered FGP46-xxxx-xxx (e.g., FGP46-0808-007).
Optima Custom Systems
All custom Optima systems contain one or more of the following enclosure models:
3 RU
2 RU
Optima Input/Output Boards
A single enclosure can handle a combination of signals (such as analog audio, analog video, sync,
digital video, DVI, etc.) depending on the number and type of input/output (I/O) boards. Optima 2 RU
enclosures have four board slots while Optima 3 RU enclosures have six board slots. (A double-
connector board fills two board slots and has two rows of connectors; see page 13.)
For information on the specific I/O boards in your system, including connector types, cabling/wiring
directions, specifications, and any special considerations, see the applicable board chapter in this manual
(chapter title specifies the board's signal type).
The following tables provide configuration sizes and part numbers for boards that are sold individually
for custom systems. Pre-engineered systems will also contain boards from these tables.
Signal
Standard Video
(BNC Connectors)
S-Video
(S-Video Connectors)
Y/c
(BNC Connectors)
Optima Instruction Manual
Enclosure Size and Part #
FG1046-10
FG1046-13
Optima Video I/O Boards and Part #
Configuration
8x8
16x16
16x24
20x4
20x20
24x4
24x16
36x4
8x8
16x16
8x8
Overview and General Specifications
Part #
FG1046-440
FG1046-485
FG1046-545
FG1046-470
FG1046-413
FG1046-515
FG1046-431
FG1046-422
FG1046-446
FG1046-488
FG1046-476
7