Optima General Specifications - AMX Optima Instruction Manual

Overview and General Specifications
System Serial Number
The system's serial number is normally located in two places on the enclosure.
When viewed from the rear, one serial number label is on the left expansion plate (FIG. 4 on page 12).
The second serial number label is on the left side of the enclosure at the bottom edge near the power
receptacle. The label on the side will also have the enclosure number (referred to as the chassis number).
A single enclosure will be labeled "Chassis 1 of 1"; in a multiple-enclosure system, the enclosures will
be labeled "Chassis 1 of 3", etc.
Before installation, we recommend recording the system's serial number in an easily accessible location.

Optima General Specifications

General Specifications
Approvals
Humidity
Operational Temperature
Storage Temperature
MTBF
2 RU Enclosures
AC Power*
Power Consumption (max.)
Power Consumption (typical)
Thermal Dissipation (max.)
Thermal Dissipation (typical)
Dimensions
Depth
Width with mounting ears
Width without mounting ears
Height
Weight
3 RU Enclosures
AC Power*
Power Consumption (max.)
Power Consumption (typical)
Thermal Dissipation (max.)
Thermal Dissipation (typical)
Dimensions
Depth
Width with mounting ears
Width without mounting ears
Height
Weight
* The fuse is internal and is not field serviceable. If you believe the fuse needs to be replaced, contact
technical support (see page 38).
For individual board information and specifications, see the specific board chapter in this manual.
AMX reserves the right to modify its products and their specifications without notice.
14
Parameter
CE, UL, cUL, US FCC Class A, RoHS
0 to 90% non-condensing
32° F to 110° F (0° C to 43° C)
-22° F to 158° F (-30° C to 70° C)
92,000 hrs.
100 VAC to 240 VAC, single phase (50 Hz to 60 Hz)
1.8 A @ 100 VAC to 240 VAC max.
260 Watts
110 Watts fully loaded enclosure
887 BTU/hr.
375 BTU/hr., fully loaded enclosure
12 in. (30.5 cm)
18.9 in. (48.0 cm)
17.4 in. (44.2 cm)
3.5 in. (8.9 cm)
Approximately 10 lb. (4.54 kg) per loaded enclosure
100 VAC to 240 VAC, single phase (50 Hz to 60 Hz)
3.3 A @ 115 VAC max.
1.6 A @ 230 VAC max.
260 Watts
150 Watts fully loaded enclosure
887 BTU/hr.
512 BTU/hr., fully loaded enclosure
12 in. (30.5 cm)
18.9 in. (48.0 cm)
17.4 in. (44.2 cm)
5.2 in. (13.2 cm)
Approximately 12 lb. (5.44 kg) per loaded enclosure
Value
Optima Instruction Manual