4X4 Dvi I/O Board Specifications - AMX Optima Instruction Manual

DVI (Digital Visual Interface) I/O Boards

4x4 DVI I/O Board Specifications

Applies to I/O board FG1046-479.
This board comes in a number of pre-engineered systems or can be ordered individually for custom
systems.
Specifications
Parameter
Data Rate (max.)
Pixel Clock (max.)
Resolution Support
Signal Type
DDC/EDID Support
HDCP Support
Input Voltage (nominal)
Input Voltage (max.)
Output Voltage (nominal)
Output Reclocking (CDR)
Output Pre-emphasis
Output +5 VDC DDC Pin
Output Rise Time / Fall Time
Connectors
Note: Power requirements for the 4x4 DVI I/O board allow for no more than 4 boards in a single
enclosure.
62
4.95 Gbps
165 MHz
Up to 1600x1200 @ 60 Hz refresh rate
DVI-D (Single Link)
EDID provided by the Optima
No
1.0 Vpp Differential
1.5 Vpp Differential
1.0 Vpp Differential
Yes
Yes, for improved cable drive
50 mA available on each output
75 ps min. to 240 ps max. (20% to 80%)
0.12 UI min. to 0.4 UI max. (@ 1.65 Gbps, 20% to 80%)
DVI-I female (DVI-D single-link is the supported signal type)
Value
Optima Instruction Manual