Splash Screen Examples - AMX Optima Instruction Manual

Splash Screen Examples

Following are four examples of splash screen information that could be displayed when different
verbosity/component settings are specified. Depending on the amount of detail provided, you may need
to scroll to see the entire display. Use the first example to check the host software (IOS) version and the
hardware driver (appcode) version.
~scrv1i1!
[1:Enclosure] AutoPatch Optima
[host software] v3.2.3
[hardware driver] v1.4.0 R
[build date] Jan 13 2009 11:11:53
[xnet address] 0x0675
[ap system id] 0x0
[nvram status] valid.. user preferences restored
[nvram magic] 0xdedafaba
FIG. 81
Display for v1i1 (verbosity 1, component 1)
~scrv3i3!
[3:Communication Interfaces] count = 4
[interface 1] detected
[type] BCS mode RS232 port, 9600 (8/1/N/E/NS)
[interface 2] detected
[type] Block mode FP port, 115200 (8/1/N/NE/S)
[interface 3] detected
[type] MCF5272 FEC Ethernet Controller
[interface 4] detected
[type] Neuron bridge v1.0.3
FIG. 82
Display for v3i3 (verbosity 3, component 3)
Optima Instruction Manual
Appendix B – Programmer's Interface for System Diagnostics
133