Table of Contents
Advertisement
Chapter 4
Accessory and Cable Connections
NI 951x User Manual
5.
Connect the limits, feedback, and other I/O signals to the 37-pin
terminal block or custom cable.
6.
Connect the drive power supply to the P7000 drive.
7.
Update the axis configuration settings in software for proper operation
with the P7000 drives. Refer to NI 951x to P7000 Drive Configuration
Settings in the NI SoftMotion Module book of the LabVIEW Help for
axis setting information.
Figure 4-1 shows a simplified connection diagram.
4-2
ni.com
Advertisement
Table of Contents
