Projector Preferences - Christie PowerTool User Manual

Section 5: Backing Up Projector Settings
5. When restoring channel definitions, PowerTool prompts you to delete
existing channels first:
•
•
If no projectors are found, your router and/or firewall may not be
NOTE:
configured correctly. If some projectors are found and others are not, you
may have problems with one or more of the following: duplicate IDs or IP
addresses, incorrect IP addresses, or incorrect firewall configuration.

5.3 Projector Preferences

Table 5.1 Projector Preferences
Shutter
Picture Mute
Onscreen
Display
Picture-in-
Picture
Active
Projector
Auto Setup
Size-Position
Presets
Size
Vertical
Stretch
Pixel
Tracking
Pixel Phase
Horizontal
Position
5-2
Click Yes to clear existing channels. Only the channels in the
restore file will remain after the restore operation.
Click No to keep existing channels. Only the channels that in the
restore file are updated. Other channels remain unchanged.
3D Stereo
Select Sync
3D Stereo Sync
Delay
Frame Delay
Brightness
Uniformity
Edge Blending
Edge Blend
Select
Select Output
Color
Warp Select
2D Keystone
Corners
Warp Prefilter H
Warp Prefilter V
Warp Sharpness
Test Focus
Pattern
Grey
Freeze Internal Test
Image Pattern
Level Select
Detector Source
Color Select Input
Enable
Lamp Source/
Message Channel
Enable Name
Lamp Limit In Menu
Lamp Source
Mode Memory
Lock
Lamp Auto Source
Power
Lamp Delete
Intensity Source
Lamp Baud Rate
Changed
Optical Baud Rate
Aperture Secondary
LampLOC Projector
Module Number
Language
Screen
Orientation
Broadcast Keys
Projector
Number
Password
Enable
Fan Sensor
Enable
PIP Border
Width
Br. Uniformity
Select
PIP Horizontal
Position
PIP Vertical
Position
PIP Horizontal
State
Blue Odd Gain
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)