Lamp Tab; Lamp Mode - Christie PowerTool User Manual

Section 4: PowerTool Interface
Output Color - Color – Identifies the color to be adjusted. This feature is
enabled for User 1–4 color adjustments only.
Color Adjustment by XY – Select this feature to enable the Color XY
sliders to adjust the color specified in the Output Color drop-down. It
allows you to define Red, Green, Blue and White by defining their RGB
components. This feature is enabled for User 1–4 color adjustments only.
Color Saturation – Select this feature to enable the Color Saturation
sliders. This feature is enabled for User 1–4 color adjustments only

4.4.5 Lamp Tab

Lamp Mode

Lamp Mode –
power and light output.
Max brightness – The lamp burns as brightly as possible, driven by
100% of the power level rating for the installed lamp. Maximum
brightness for any lamp gradually diminishes with age and images
become dimmer over time. The lamp's current output level is reflected
in the Intensity control.
Intensity – Brightness remains close to the specified level for as long
as possible. If you select this option, you must also set the desired
intensity level using the Intensity control. The projector will
automatically adjust power as needed to maintain this intensity as
closely as possible.
Power – Power supplied to the lamp will remain at the specified
wattage level. If you select this option, you must also set the power level
using the Power (W) control.
4-12
Figure 4-12 Lamp tab
Indicates the lamp usage mode that regulates the lamp's
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)