Table of Contents
Advertisement
Section 3: Working with PowerTool
If you have multiple projectors selected, you can control all of them with
VirtualRemote as long as they are all of a similar type.
To access VirtualRemote:
1.
Select the projector(s) you want to work with.
2.
Click Launch > VirtualRemote in the Control ribbon.
3.
If PowerTool can find the projectors you selected, the Projectors
Connected dialog box appears, showing you the projectors that you will
be controlling with VirtualRemote. Click OK. The VirtualRemote
window appears.
NOTE:
one of the two examples in Figure 3-9.
Figure 3-9 VirtualRemote Windows, Showing Two Types of Remote
4.
If you did not select any projectors, the Communication Setup
Wizard dialog box appears.
3-10
VirtualRemote is supported if your projector remote looks like
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Advertisement
Table of Contents
