Table of Contents
Advertisement
5.
Specify the Port number where the projector is located, and click
Next. The Device Selection List dialog box appears.
6.
Select the projector(s) you want to work with, and click Finish.
7.
Click the buttons on the virtual remote to select functions as you would
press the buttons on a real remote keypad. The commands are sent to the
selected projectors. To rotate the VirtualRemote window counter-
clockwise, click the rotation button in the lower-left corner of the
window. Click it again to rotate back.
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Figure 3-10 Communication Setup Wizard
Figure 3-11 Device Selection List
Section 3: Working with PowerTool
3-11
Advertisement
Table of Contents
