Table of Contents
Advertisement
6.
Use the group commands below the projector list to organize the
projectors. For more information, see
3.3.2 Add Projectors Manually
If you know the IP address and port number of a projector, you can add it
manually instead of having PowerTool search for the projector.
To add a projector manually:
1.
Click the Add Projectors arrow button and then click Manual on the
drop-down menu. The Manual Add dialog box appears.
2.
To add one projector at a particular IP address, select Single. To add
several projectors at a range of IP addresses, select Range.
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Figure 3-5 Projectors added to the configuration
Figure 3-6 Manual Add Dialog Box
Section 3: Working with PowerTool
Section 3.4 Projector
Groups.
3-5
Advertisement
Table of Contents
