Change Settings; Virtualremote - Christie PowerTool User Manual

NOTE:
states: selected (all projectors), cleared (none of the projectors), and
orange background (some of the projectors).

3.5.2 Change Settings

1. Select the projectors you want to work with.
2. Click the tabs beside the projector workspace to access projector
controls. Functions that apply to all the selected projectors are enabled.
3. Work with the controls to change the settings. Changes are sent to the
selected projectors in real time.
See 4 PowerTool Interface
controls. See the projector user manual for details about supported functions
for your projector.

3.6 VirtualRemote

VirtualRemote is a software application that emulates the functionality of the
projector remote keypad. Click the buttons on the virtual remote to select
functions as you would press the buttons on a real remote keypad. The
commands are sent to the selected projector(s).
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Figure 3-8 Projector Screen Selection
Controls, such as check boxes and drop-down lists, have 3
for information about the individual PowerTool
Section 3: Working with PowerTool
3-9