Table of Contents
Advertisement
1 Introduction
1.1 Document Contents
This User's Manual includes the following sections:
•
Section 1 Introduction:Outlines document contents and conventions.
•
Section 2 Installation and Setup: Provides an outline of the
installation requirements.
•
Section 3 Working with PowerTool: Describes how to get started and
work with PowerTool.
•
Section 4 PowerTool Interface: Outlines the features of the interface
and provides a detailed description of the procedures required to use the
software.
•
Section 5 Backing Up Projector Settings: Outlines how to back up
and restore projector settings.
1.2 Document Conventions
The following text formats can be throughout the User Manual:
•
KEYPAD COMMANDS/PC KEYSTROKES E.G., POWER, ENTER,
CHANNEL
•
Content Reference e.g., Section 5 - Troubleshooting
•
Document Reference e.g., Using 3D in Mirage
•
Figure/Table References e.g., Figure 2.1, Table 4.3
•
Software Menus/Options e.g., Camera Settings, Screen
Definition
•
On screen Messages e.g., No Signal
•
OPERATIONAL STATES E.G., POWER, ON, OFF
1.3 Related Documents
All information included in this user manual is also included in the on-line
help.
This manual covers the use of controls in the PowerTool interface. For
information about supported functions for specific projector models, see the
projector user manual.
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Section 1: Introduction
1-1
Advertisement
Table of Contents
