2 Installation and Setup
Christie PowerTool allows you to connect several projectors and manage
their features, such as image, color, lamp, Picture-in-Picture, and system
status.
2.1 Requirements
2.1.1 Recommended System
•
•
•
•
•
When using a tablet PC, use Windows XP Tablet PC Edition 2005
NOTE:
SP2 or later.
2.1.2 Projector Requirements
•
•
To check firmware versions, press
NOTE:
pad and select
respectively.
2.1.3 Connection Requirements
Ethernet Connections:
•
•
•
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
PC running an Intel or 100% compatible processor
Windows XP SP3+ (32-bit only) or Windows 7 (32- and 64-bit)
256 MB of free disk space
256 MB of RAM (512 MB recommended)
An available Ethernet connection, either physical or wireless
One or more projectors running version 1.2f or later of the firmware
Each projector must be running version 3.1.2.0 or later of the Xport
firmware
. Check the version of Software and Ethernet SW
6 STATUS
1 network hub
1 Ethernet cable to connect the PC to the network hub
1 Ethernet cable per projector
Section 2: Installation and Setup
on the projector control
MENU
2-1