Table of Contents
Advertisement
Section 3: Working with PowerTool
3.4.4 Rename Groups or Projectors
To rename a groups or projector:
1.
Right-click the group or projector that you want to rename.
2.
Click Rename in the menu that appears.
3.
Type a new name in the highlighted area and press
another area.
3.5 Controlling Projectors
3.5.1 Select a Projector and View Settings
To select a projector, click it in the projector workspace. The functions and
options available for that projector are immediately activated in the
PowerTool ribbon and in the projector control tabs, while unsupported
functions and options are grayed out. In the Status tab, the current settings
and readings for the projector appear. (See Figure 3-8 on page 3-9).
You can also view some basic status for a projector by hovering the arrow
over the projector in the workspace.
To select multiple projectors, hold down the
or projectors. To select a range, click the first one, hold down the
and click the last one. When you have selected multiple projectors, only the
commands or settings common to all selected projectors are available. On
the Status tab, only the readings common to all selected projectors are
displayed.
3-8
ENTER
key while clicking groups
CTRL
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
or click in
key,
SHIFT
Advertisement
Table of Contents
