Table of Contents
Advertisement
Section 4: PowerTool Interface
4.4.7 Color Matcher Tab
Color Gamut Graph – Visually identifies the color gamut described by
the chart.
Color Gamut – Identifies the color gamut.
•
•
User 1-4 – Identifies the User location where the color gamut values are
stored.
Apply – Sends the calculated common gamut values to the selected User
location on the selected projectors. This option is available when multiple
projectors are selected.
Undo – Restores the color gamut values that were in use prior to applying
the common gamut. This option is available immediately after applying a
common gamut.
4-16
Figure 4-14 Color Matcher
For a single selected projector, identifies the color gamut stored at
user locations 1 through 4. Values reflect the User location selected.
For multiple selected projectors, calculates the common gamut that
can be supported by the selected projectors. If applied, the values
will be stored at the selected User location.
PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Advertisement
Table of Contents
