Table of Contents
Advertisement
5.2.1 Automatic Search
Press OK over the Automatic Search.
The warning message "Do you want to start Automatic Search?" will appear. Press LEFT/RIGHT to
move the cursor and OK to continue. The message "Do you want to erase your previous channel list?"
will appear. Please press LEFT/RIGHT to choose whether to erase your previous channel list.. If you
want to cancel channel search press the EXIT button.
On completing the search, the receiver will save automatically the services information and exit to
normal play state.
5.2.2 Manual Search
Press OK over the Manual Search, the Manual Search screen will appear.
Press LEFT/RIGHT to choose channel No. or press numerical buttons to input channel number.
Check indicators of the signal level and quality to make sure the values are entered correctly. Press
UP/DOWN to move cursor to Search and press OK to search current channel. If no service is
installed, there will be the warning "No Signal". Press any key to return.
Tips
Different countries have different VHF/UHF frequency plans. It is important to
select the proper country.
5.3 Installation
5.3.1 System Setting
In this menu, you can configure the system settings Language, TV Settings, Country, Channel
Numbering, Antenna Power, Time Settings, and Factory Default.
5.3.1.1 Language
You can change the language of the OSD and Audio.
Press UP/DOWN to select the OSD Language or Audio language.
Press OK/Right to enter the language list and Press UP/DOWN to select the language. Press OK
to confirm.
5.3.1.2 TV Settings
You can set TV Standard, TV Format and Video Output.
TV Standard
n
Press OK/RIGHT to select PAL or NTSC and OK to confirm. If you don't know which
standard your TV has, please select AUTO.
10
PART 1 • English
Advertisement
Table of Contents
