Related Manuals for Strong SRT 5003
Summary of Contents for Strong SRT 5003
- Page 1 Digital Terrestrial Receiver SRT 5003 User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Manual del usuario Návod k obsluze Upute za korištenje...
-
Page 4: Table Of Contents
6.2 Accessing the Electronic Program Guide (EPG) 6.3 Accessing the favourite channels 7.0 TRoublE shooTIng 8.0 sPECIfICATIons STRONG declares that this item complies with the basic requirements and other relevant regulations of directives * €0,14/Min. from German wired line * €0.42/Min. max. from mobile network CE 2004/108/EEC and 73/23EEC;... -
Page 5: Instruction
Attachments-For your safety, and to avoid damaging the product, use only accessories recommended by STRONG. Water and moisture- Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement. swimming pool or in the rain) -
Page 6: Storage
PART 1 • English heat-Never use or store this product near any heat source such as a radiator heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. servicing-Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points. -
Page 7: Accessories
PART 1 • English 1.4 Accessories: 1. 1 User Manual 2. 1 Remote control unit 3. 2x Batteries (AAA type) noTE: The batteries should not be recharged, disassembled, electrically short- circuited or be mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g. -
Page 8: Default Pin- Code: 0000
PART 1 • English 5. Info Shows the actual channel information 6. vol+/vol- Volume up/down 7. mEnu Opens the main menu/In menu you will get one step back 8. EXIT Exits from the menu or sub-menu 9. pq Menu Off: Change channel to previous/next. Menu On: Moves the cursor up/down. -
Page 9: Tv Channel List
PART 1 • English 5.1.1 Tv Channel list 1. In Channel submenu select TV Channel List with the qp buttons and press oK to enter. 2. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). -
Page 10: Installation
PART 1 • English move Press the [4] button to activate the Move function. The selected channel will be marked in a symbol q p , use the qp buttons to move the selected channel to the desired position. Press oK, with tu select Yes in the confirmation window and press [4] to save. -
Page 11: Setup
PART 1 • English start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5.2.3 Antenna setting 1. Press mEnu to enter main menu. 2. Use the qp buttons to select Installation, press oK to enter the menu. 3. -
Page 12: Timer Setting
PART 1 • English GMT Offset: This menu is valid only when selected "User Define" in GMT Usage menu. The GMT offset range is "-11:30 ~ +12:00", increasing by half hours progressively. Date/Time: "Date" and "Time" menus are valid only when selected "Off" in GMT Usage menu. -
Page 13: Tools
2. Press EXIT button to exit. 5.4.1 Receiver Information This menu displays some Receiver information like Receiver Model, Software, Signature, and our Website www.strong.tv. 1. In Tools menu, select "Receiver Information" and press oK to open receiver information. 2. Press EXIT button to exit. -
Page 14: Media
This receiver has foreseen an over the air update function, which might not noTE: be available at your local broadcast conditions. For further details visit our website www.strong.tv or contact your local Serviceline. 5.5 media+ Select "Media+" and press oK button to enter Media+ menu. -
Page 15: Accessing The Electronic Program Guide (Epg)
If the receiver does not work properly after checking it, please contact your local Serviceline or STRONG dealer. Alternatively you can send a support mail via our website: www.strong.tv. Do NOT open the receiver cover. It may cause a dangerous situation and the warranty will get void. -
Page 16: Specifications
Remote batteries exhausted Replace remote batteries Forgotten PIN code Contact local Service Hotline or send email to our Support via www.strong.tv After moving the Antenna signals are too weak Press 3 x Info button on remote receiver to another for call signal bars and adjust... - Page 17 PART 1 • English multimedia: Video playback: MPEG-1 and MPEG-2 encoded (mpg) Audio playback: MP3 and WMA formats Picture view: JPEG format memory and system: Flash memory: 1 MByte SDRAM: 8 MBytes Connectors: ANT IN: IEC Female TO TV: IEC Male TV SCART (RGB, CVBS) S/PDIF: coaxial output...