Determining The Ip Address; Using The Telephone Dialpad To Set The Ip Address - Avaya 4602 Administrator's Manual

Managing the Telephone Manually or Using the Web Interface

Determining the IP Address

To verify the IP address currently assigned to the telephone, follow this procedure:
1. With the phone idle, press Mute
The phone displays Info View and *=End #=Next
2. Press #.
The phone displays IP address DHCP or IP address Static and the numeric IP
address.
3. To exit the INFO mode and return the phone to normal operation, press *.

Using the Telephone Dialpad to Set the IP Address

To manually set the telephone's IP address, follow these steps:
1. Plug in the phone and watch for the prompt Press * for Setup.
2. When the prompt displays, press the * key.
The phone displays Clear All Values and *=No #=Yes.
3. Press *
The phone displays DHCP=On/Off and *=Toggle #=OK *=.
4. Press * until DHCP=Off displays.
5. Press #.
The phone displays IP Addr=? and Speaker=? #=OK *=.
6. Use the dialpad to enter the IP address, then press #. (If applicable, press
the Speaker button to backspace.)
The phone displays Mask=? and Speaker=<- #=OK *=.
7. Enter the SubNet Mask, then press #.
The phone displays Gateway=? and Speaker=? #=OK *=.
8. Enter either the Router address or Gateway address, then press #.
9. You may optionally specify other parameters, when prompted. Or, if you plan to complete
programming from the Web interface, press # in response to all other prompts.
The phone displays Saving Values and then Starting. The telephone then reboots
using the values entered.
28 4602 SIP Telephone SIP Release 1.2 Administrator's Guide
and enter I N F O # using the dialpad.