Configuration File Examples; Required Parameters - Avaya 4602 Administrator's Manual

Configuration File Examples

Figure 1: Configuration File Examples
4602D01A.txt
# This configuration file is version 1.0 created on 9/15/03.
AppName sip_4602ap0079.ebin
BootName sip_4602bt0079.ebin
# Includes must be at the end of the main configuration file only
Include
comon.txt
# This common configuration file is version 1.0 created on 9/15/03.
Hotline 5000
MsgButtonUrl 77777
DstEnable 1
DstEnd 0430
DstStart 1026
DialPlan 911|[1-8]xxx|9xxxxxxx|90|91xxxxxxxxxx
ForcedLogin 1
CallFwdAddress sip:voicemail@avaya.com
DTFormat
ProxyServers
RegistrarServers 192.168.0.9:5060

Required Parameters

Certain parameters must be specified for the 4602 SIP Telephone to operate properly in most
SIP environments. Those required parameters are:
IP Address (IPAddress) - Usually supplied by DHCP, but can be manually configured from
the dialpad or using the Web interface.
Subnet Mask (SubNetMask) - Usually supplied by DHCP, but can be manually configured
from the dialpad or using the Web interface.
Gateway (GatewayAddress) - Usually supplied by DHCP, but can be manually configured
from the dialpad or using the Web interface.
DNS Server IP Address (DnsAddress) - Usually supplied by DHCP, but can be manually
configured from the dialpad or using the Web interface. This parameter must be supplied if
a domain is specified for the proxy or registrar.
common.txt
2
192.168.0.9:5060
Setting Parameters
Issue 1.2 January 2005 23