Avaya 4602 Administrator's Manual page 39

Table 1: 4602 SIP Telephone Parameters (continued)
Parameter
HotDial
HotLine
HotLineAddress
Include
IPAddress
IPDialing
Layer2Audio
Layer2Signaling
Layer2Tagging
Value Type Value
1 ASCII When HotDialing is enabled, the
character user can dial calls without first
going off hook on the handset or
speaker. HotDialing automatically
turns the speaker on. Note that
HotDialing is automatically
disabled if HotLine is enabled.
0 = Disabled
1 = Enabled
Up to 1 Enables or disables hotline
ASCII operation.
character 0 = disable
1 = enable.
When HotLine is active, hotdialing
and speed dialing from the phone's
dialpad are automatically disabled.
Note: The Avaya SIP Solution does
not support this feature.
Up to 64 Specifies the URI dialed when the
ASCII set goes offhook and HotLine is
characters enabled.
Note: The Avaya SIP Solution does
not support the Hotline feature.
Up to 64 The file name specified is read and
ASCII its contents processed as another
characters configuration file. Configuration
files can have more than one
Include parameter.
Dotted IP address to be used by the
Decimal telephone.
ASCII
1 ASCII This lets the user enter a numeric
character IP address to dial as a dial string.
Mainly useful during debugging.
0 = IP address dialing off
1 = IP address dialing on
1 ASCII Layer 2 audio priority values, from
character 0 to 7.
1 ASCII Layer 2 signaling priority values,
character from 0 to 7.
1 ASCII 802.1Q tagging enabled on Port 1.
character 0 = Disable
1 = Enable
Introduction
Default Source(s)
0 CFG,
WEBA,
WEBU
0 CFG,
WEBA
"" CFG,
WEBA
"" CFG
0.0.0.0 DHCP,
MAN,
WEBA
0 CFG,
WEBA
6 CFG,
WEBA
6 CFG,
WEBA
0 CFG,
MAN,
WEBA
Issue 1.2 January 2005
5 of 8
39