Avaya 4602 Administrator's Manual page 41

Table 1: 4602 SIP Telephone Parameters (continued)
Parameter
RegistrarPort
RegistrationDomain
RingType
RtpBase
SipName
SipProtocol
SipPwd
SiteOption
SntpServers
SpeedDial
Value Type Value
Up to 4 Port number to contact the
ASCII Registrar server. If a domain is
characters specified for Registrar servers, this
value must be 0. If an IP address is
specified for Registrar servers, this
value must be 5060.
Up to 255 SIP Domain, for example:
ASCII example.com
characters
Up to 2 Telephone ring type. Permitted
ASCII values are 1 to 16.
characters
Up to 5 The base port from which the
ASCII phone increments upward to
characters specify where it will receive media
streams.
Up to 32 SIP user name or extension used
ASCII with the set's IP address to
characters uniquely identify the user. SipName
is used to login to the Registrar, but
is only used if ForcedLogin is
disabled.
1 ASCII Transport protocol:
character 1 = UDP
2 = TCP
Up to 16 Password that is passed on to the
ASCII Registar for user authorization. The
characters value is only used if ForcedLogin
is disabled.
Up to 3 Site-specific option number
ASCII between 130 and 254 used by
characters DHCP.
Up to 255 SNTP server's IP address.
ASCII
characters
Up to 255 Specifies the data assigned to a
ASCII Speed Dial button in the format:
characters Name, Number. The name field is
restricted to 14 characters. More
than one SpeedDial parameter
may be specified.
Examples:
Bob Day, 6715
Dave R, sip:dbr@home.com
Introduction
Default Source(s)
5060 CFG,
WEBA,
MAN
CFG,
WEBA
1 CFG,
WEBA,
WEBU
16384 CFG,
WEBA
"" CFG,
WEBA,
WEBU
1 CFG,
WEBA
"" CFG,
WEBA,
WEBU
172 CFG,
WEBA
0.0.0.0 CFG,
WEBA
"" CFG,
WEBU
Issue 1.2 January 2005
7 of 8
41