Table of Contents
Advertisement
Configuration
Setting Alarm-Out Actions
You can associate Alarm-Outs with a selected camera. When the DVR detects video
loss on the selected camera, it triggers output signals on the associated Alarm-Out
connectors. You can also have the DVR internal buzzer sound if video is lost on the
selected camera.
1.
2.
3.
Setting Video Loss Notifications
1.
2.
3.
Document 800-03650 Rev D
02/09
Highlight the desired field under the Alarm-Out heading, and press
Alarm Outputs appears.
Select the Alarm Output connectors that you would like to activate whenever the
DVR detects video loss on the selected camera.
Select OK and press
Note
For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Highlight the desired field under the Notify heading, and press
Loss Notify menu appears.
Figure 3-66
Video Loss Notify Menu
You can toggle the entire list On and Off by highlighting Notification and
pressing
.
You can toggle the individual items On and Off by highlighting them and pressing
.
Highlight OK and press
to accept the changes.
to accept your changes.
. A list of
. The Video
93
Advertisement
Table of Contents
