Table of Contents
Advertisement
Configuration
Using the Current LAN Settings Using DHCP
Select DHCP from the LAN Type field, highlight Save, and then press
(Dynamic Host Configuration Protocol) network reads and configures the current IP
address of the DVR.
Configuring the LAN Using ADSL
1.
2.
Document 800-03650 Rev D
02/09
Figure 3-26
LAN (DHCP) Setup Screen
Select ADSL (with PPPoE) in the LAN Type field. The LAN (ADSL) setup screen
appears.
Note
ADSL and modem cannot be configured at the same time. If the
DVR is configured by modem, the ADSL (with PPPoE) can not be
selected.
Figure 3-27
LAN (ADSL) Setup Screen
Highlight the field beside ID and press
can enter the ID for ADSL connection.
. A virtual keyboard appears so you
. The DHCP
55
Advertisement
Table of Contents
