Table of Contents
Advertisement
Operation
Freeze Mode
To freeze the current image on screen, press
the screen until you press the button again. While in the Freeze mode, the
displays in the bottom-left corner if Freeze is selected in the Display setup screen (OSD
tab).
Zoom Mode
You can enlarge an area of the video by pressing ZOOM. The
is selected in the Display setup screen (OSD tab).
Selecting the Zoom Area
Press ZOOM. A rectangle displays on the screen for a few seconds. This rectangle
selects the area to be enlarged.
Changing the Zoom Area
To change the zoom area, move the rectangle around using the arrow buttons. To
enlarge the zoom area in the Zoom mode, press
ZOOM again.
Adjusting the Image
If you have Color Control authority and are logged into the system, you can adjust
brightness, contrast, hue and saturation for each camera.
Adjusting a Camera Image
1.
110
Note
It is important that cameras and monitors are correctly installed
and adjusted prior to making any image adjustments using the
DVR controls.
Press and hold a camera button for a few seconds to display an image adjustment
dialog.
(Play/Pause). This image remains on
icon displays if Zoom
. To exit the Zoom mode, press
icon
Advertisement
Table of Contents
