Table of Contents
Advertisement
Configuration
Save your Video Loss changes by highlighting Save and pressing
to exit the screen without saving the changes.
Text-In Screen
Using the Text-In screen, the DVR can be set to react to text input from devices such as
ATMs (Automated Teller Machines) and POS (Point of Sale; for example, cash
registers). You can configure the DVR for each text-in device using this screen.
Highlight Text-In in the Event menu and press
Highlight the field under the Setup heading, and press
heading changes all the parameters, excluding Port settings, of all the text input
channels.
Document 800-03650 Rev D
02/09
Figure 3-68
Text-In Settings Screen
Note
The system performance can be affected when a large quantity
of text inputs are detected from several channels at the same
time.
Note
VP Filter, Generic Text, and EPSON-POS devices are currently
supported.
. Select Cancel
. The Text-In setup screen appears.
. Selecting the Setup
95
Advertisement
Table of Contents
