Table of Contents
Advertisement
Configuration
2.
Setting Alarm-Out Actions
You can associate Alarm-Outs with the Text Inputs. When the DVR detects text input on
the selected text-in device, it triggers output signals on the associated Alarm-Out
connectors. You can also have the DVR internal buzzer sound if text-input is detected.
1.
2.
Setting Text-In Notifications
1.
2.
3.
Document 800-03650 Rev D
02/09
Select the cameras that you want the DVR to record when text input is detected.
If the DVR detects text input on the selected text-in device, it starts recording video
from all the associated cameras.
Note
For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Highlight the desired field under the Alarm-Out heading, and press
Alarm Outputs appears.
Select the Alarm Output connectors that you would like to activate whenever the
DVR detects text input.
Note
For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Highlight the desired field under the Notify heading, and press
Notify menu appears.
You can toggle the entire list On and Off by highlighting Notification and
pressing
.
You can toggle the individual items On and Off by highlighting them and pressing
.
Highlight OK and press
Note
For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RASplus (Remote Administration System).
to accept your changes.
. A list of
. The Text-In
99
Advertisement
Table of Contents
