Figure 3-55 Alarm-In Actions 2 Screen - Honeywell HRSD8 User Manual

Configuration
Selecting PTZ Presets
You can preset the position for each PTZ camera or where you want each PTZ camera
to move whenever the DVR detects an input on the associated alarm input.
1.
2.
3.
4.
Associating Spot Monitors with Cameras
A Spot monitor can be associated with a camera. The DVR displays the associated
camera on the Spot monitor whenever it detects input on the associated alarm input.
1.
2.
3.
4.
Document 800-03650 Rev D
02/09
Figure 3-55 Alarm-In Actions 2 Screen
Highlight the desired field under the PTZ heading, and press
cameras appears.
Decide which camera you would like to associate with that Alarm-In input, and
then set the preset by highlighting the field for that camera in the Preset column.
Press to open a list of Presets.
Scroll through the list using the UP and DOWN arrows, and then press
select the preset.
Select the PTZ preset from the list.
Highlight the desired field under the Spot Monitor heading, and press
of Spot monitors and cameras appears.
Select from the lists of spot monitors and cameras.
Select OK and press
Save your Alarm-In changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
to accept the changes.
. A list of PTZ
to
. A list
. Select
83