Extending The Server From The Rack - HP ProLiant ML350 Generation 4p User Manual

26 HP ProLiant ML350 Generation 4p Server User Guide
5. If the server is installed in a rack, locate the server by identifying the
illuminated rear UID LED button.
6. Disconnect the power cords.
The system is now without power.

Extending the Server from the Rack

1. Loosen the thumbscrews that secure the server faceplate to the front of the
rack.
2. Extend the server on the rack rails until the server rail-release latches engage.
IMPORTANT: If the server is installed in a telco rack, remove the
server from the rack to access internal components.
WARNING: To reduce the risk of personal injury or
equipment damage, be sure that the rack is adequately stabilized
before extending a component from the rack.
WARNING: To reduce the risk of personal injury, be
careful when pressing the server rail-release latches and sliding
the server into the rack. The sliding rails could pinch your fingers.