Configuring An Advanced Recording Schedule - HIKVISION DS-9000 Series User Manual

Dvr/nvr

Hide thumbs Also See for DS-9000 Series:

Table of Contents

Select the camera to configure from the camera drop down menu. If all the cameras are to be configured with the

same settings, select All Cameras from the list.

Check the Enable checkbox to enable the recording schedule. If the checkbox is unchecked, the recording

schedule will be disabled.

Check the 24/7 checkbox if you would like to record continuously or on event for 24 hours a day, 7 days a week.

If you wish to schedule different time frames for Monday through Sunday, leave the 24/7 checkbox unchecked

and skip to step 6.

Select Recording Type for 24/7 recording and move on to step 8. Recording type includes Continuous for

continuous recording or On Event for recording when an event is triggered (i.e. from detected motion).

Select the start and stop time for each day of the week. The start and stop time are listed using a 24 hr cycle (i.e.

18:00 is equivalent to 6:00pm).

Select Recording Type for each day of the week. Recording type includes Continuous for continuous recording or

On Event for recording when an event is triggered (i.e. from detected motion) for the selected time period.

Select the Save button to save the schedule settings and select Exit to return to the previous menu. Selecting the

Exit button without clicking Save will quit out of the menu without saving settings.

Note:

On Event recordings are recordings that are triggered from motion detection and/ or from an external alarm (See

Configuring Alarms and Exceptions on page 61).

If an event occurs during Continuous recording, the frame rate will automatically switch to that set for Event

Note:

recording.

Configuring an Advanced Recording Schedule

An advanced recording schedule allows you to schedule multiple time periods per day for recording as oppose to a single

time period of a quick recording schedule. Setting up an advanced recording schedule will allow you to further conserve

disk space by recording only during the time periods you would like to record at.

To setup an advanced recording schedule:

Enter the Advanced Schedule Configuration menu, shown in Figure 24 by going to Main Menu > Recording

Configuration > Advanced Schedule Configuration.

Figure 23. Quick Schedule Configuration Menu

Table of Contents