Configuring Recording And Capture Schedule - HIKVISION HWD Series User Manual

The resolution of sub-stream can be selected among WD1, 4CIF, and CIF.
The minimum frame rate for the sub-stream is 1 fps.
You can select the Video Encoding for the sub-stream of IP and analog cameras. For the
analog cameras, H.264 and H.265 are selectable. For the IP cameras supporting H.265, you
can select H.265 encoding mode.

5.2 Configuring Recording and Capture Schedule

The DVR supports continuous, alarm, motion, motion | alarm, motion & alarm, and event.
In this chapter, we take the record schedule procedure as an example, and the same procedure
can be applied to configure schedule for recording.
Purpose
Set the record schedule, and then the camera will automatically start/stop recording according to the
configured schedule.
Step 1 Go to Menu > Record/Capture > Schedule.
Different recording types are marked in different color icons.
Continuous: scheduled recording.
Event: recording triggered by all event triggered alarm.
Motion: recording triggered by motion detection.
Alarm: recording triggered by alarm.
M/A: recording triggered by either motion detection or alarm.
M&A: recording triggered by motion detection and alarm.
Digital Video Recorder User Manual
Figure 5-8 Record Schedule
72