GRE PSR-500 Owner's Manual page 98

1. Turn off the scanner, then turn it on again. The scanner briefly
displays the DSP boot version, and then the Welcome/Owner
screen is displayed.
2. Press
screen. The scanner displays
System Tests:
Select a Test...
Exits if no key
is pressed
3. Press
Factory Init
Erase Memory
ENTER if APPROVE
CLEAR to EXIT
4. Press
Initializing the
File System
Please Wait.....
Then,
File System
Initialized to
Defaults.
Press any key.
5. Press any key on the keypad to proceed. The scanner will
next display:
GLOB EEPROM area
Initialized to
defaults.
Press any key.
6. Press any key on the keypad to proceed. The scanner will
reboot with file system and global parameters reset to factory
defaults.
PSR-500 User Manual Page
0
while the scanner is displaying the Welcome/Owner
1
. The scanner displays
ENT
. The scanner displays
98