Advertisement
Fav
Skywarn
EXPERT BELOW
Delay
Delay Time
AudioBoost
Hit Count
PSR-500 User Manual
Page
When On, the TGRP object is a member of the
On or Off
Favorites Scan List.
When On, the CONV object is a member of the
On or Off
Skywarn Scan List.
Controls whether a Delay is used to wait for reply
On or Off
traffic after a transmission on the TGRP.
Sets the amount of time (in 100 millisecond
1-200 x 100 mS
intervals) for the wait for reply delay if Delay is On,
e.g., 20=2 seconds.
Applies a 6 dB boost to audio levels when the
On or Off
object is active
Increments each time a transmission is received on
Numeric value
the SWPR object. Global "Hit Counts" must be set
to ON. Press the
Dflt
softkey to reset to 0.
106
Advertisement
