Advertisement
To enter LMIT mode, press the
repeatedly until the display indicates LMIT search as follows:
Use the Lmts softkey to set the lower and upper frequency limits
for your limit search.
NOTE: When a signal is being received, the Lmts softkey (F1) changes to
the F1 key function is FrL/O.
Press the or keys on the 5-way pushbutton pad to change
the search direction.
Press the MODE softkey to change the receive mode (AM, FM,
NFM) from the default for the current frequency range (au).
Press the FrL/O softkey to add a found frequency to the lockout
list.
Press the STOR softkey to create a new CONV object using the
found frequency.
Using dedicated SRVC mode
Your scannerʼs dedicated SRVC search modes provide you with
the ability to instantly access each of the scannerʼs service
search ranges without creating a new SRVC object.
To activate dedicated SRVC search mode, press the
on the keypad repeatedly until the desired service search is
PSR-500 User Manual Page
FrL/O. You can access the Lmts softkey by pressing FUNC F1 when
SRCH
key on the keypad
SRCH
key
77
Advertisement
