Advertisement
have started searching, the radio will stop on any object where
your find text is found in the frequency, tag, or ID fields as
described above. When the scanner finds a matching object, you
may press
Manual mode. You may also press
execute programming tasks at the found object position. If you
wish to edit the object, press the EDIT softkey. If you wish to
continue searching, press the NEXT softkey.
FIND keeps the last search text you specified stored so that you
may use it again in subsequent FIND operations.
Filtering By Object Type
When browsing objects in PGM mode, you can filter the objects
that are displayed by their type.
Press the
Press the or keys on the 5-way pushbutton pad to scroll the
Edit softkeys to display the filter softkeys. The filter softkeys are
as follows:
CONV
TGRP
TSYS
SRCH
SWPR
To filter browse for a specific type of object, press the softkey
that corresponds with that object type. For example, press the
CONV softkey, then use the keys on the 5-way
pushbutton pad to browse only conventional objects.
Object Lockout
The
locked out, traffic is not received on that object until it is
unlocked, even if the object is mapped to more than one Scan
List. Locking out an object locks it out "radio-wide" until it is
enabled by toggling the lockout setting.
Four types of lockout functions are available in the PSR-500,
temporary lockout, permanent lockout, search lockout and
talkgroup lockout.
Temporary Lockout
Temporary lockout locks out an object until the scanner is turned
off. When the scanner is powered on again, all objects that have
been temporarily locked out are restored.
PSR-500 User Manual
Page
MAN
to begin monitoring of the found object in
PGM
key on the keypad, then press the EDIT softkey.
L/OUT
key is used to lock out objects. When an object is
PGM
to exit FIND and
61
Advertisement
