Advertisement
Applying wildcard lockout to an undesired talkgroup creates a
new TGRP object in the same Scan List as the wildcard TGRP,
then applies permanent lockout to the new TGRP object, so that
will be ignored in the future by the scanner when scanning the
wildcard talkgroup. To unlock or edit talkgroups locked out using
the wildcard lockout feature, press
object using the 5-way pushbutton pad. Press
to remove permanent lockout from the talkgroup. Press
then
EDIT, then the CURR softkey to edit and save the TGRP object.
Setting the Default Scan List
By default, your scanner will store all new objects, and objects
found during Search, Tune, and Sweeper as mapped to Scan
List 01.
You can easily change the default Scan List to any Scan List you
specify, including the special FAV and SKYWARN Scan Lists.
Press
down until the Dflt ScanList item appears in the middle of
the display. Enter a new Scan List number to use as the default
Scan List. The following numbers are valid:
0:
The "not scanned" (ns) Scan List - objects that have no
Scan List mappings can be found here
1-20:
The twenty normal Scan Lists
21:
The FAV Scan List
PSR-500 User Manual Page
CL
to delete the TGRP object from the scanner. Press the
PGM
, then the GLOB softkey, and use the key to scroll
PGM
, then navigate to the
FUNC
, then
L/OUT
FUNC
,
65
Advertisement
