Advertisement
EDACS control channel
LTR home repeater
Motorola analog voice channel
You may wish to use the PSR-500ʼs Tune LED feature to obtain
a visual indication of signal strength using the tri-color LED. To
activate the Tune LED, press
the key until Tune LED:
Use the keys to toggle Tune LED on or off, then press the
SAVE softkey to save your changes to the radioʼs configuration
memory.
Using dedicated Limit and Service search modes
The
search modes of your PSR-500. Pressing the
through each search mode in this order: Limit, Railroad, Public
Safety, Aircraft, Ham, CB, Marine, and FRS/GMRS/MURS/DOT.
LMIT Search Mode
Your scannerʼs dedicated LMIT search mode provides you with
the ability to create a limit search with a search frequency range
between upper and lower limit frequencies that you specify and
perform the limit search directly without creating a new LMIT
object. You can then monitor that frequency range for
transmissions.
PSR-500 User Manual
Page
Trunked Mode
SRCH
key provides immediate access to the dedicated
Analysis Display
qq% S:ss h/H s/S a/A
where qq=decoding quality of the
control channel data, S=Site ID, h/
H=not home site/is home site, s/S=not
SCAT site/is SCAT site, a/A=not Aux
CC/is Aux CC
HR:hh
A-HH-GGG
where HR=the home repeater number
of the tuned frequency, A-HH-
GGG=the Area, Home Repeater and
Group ID of the LTR talkgroup
VC: lsTGID-nnnnn
where lsTGID shows the decoded
talkgroup ID data from the lowspeed
data stream
Please note that the analog lowspeed
data protocol does not provide error
correction, and some false "VC:
lsTGID" readings should be expected.
PGM
, then the GLOB softkey. Press
Off appears in the display.
SRCH
key cycles
76
Advertisement
