Advertisement
GLOB Menu Reference
The GLOB menu stores all of the radio-wide settings used by the
scanner. The GLOB menu allows you to "tweak" these settings to
your liking. The default settings will work fine for most users, but
most users will want to use the GLOB menu to personalize the
radio to suit their individual tastes. The active parameter is
always the middle parameter and is indicated by a flashing ":".
The entire GLOB menu is shown below. Note that some GLOB
parameter changes do not take effect until the GLOB menu is
saved.
HINT:
You can restore all GLOB settings to their defaults without affecting
press
confirm the GLOB parameter reset.
GLOB
Parameter
CONTRAST
Owner
Clone Send
Alert Mode
Sound Mode
Key Beeps
Light Mode
PSR-500 User Manual
Page
your programmed objects or V-Scanners. Power cycle the radio, then
0
2
, then
during the welcome message display. Press
Options
1-7
SEL
SEL
Both, Tone, Light, Off
Key or Stlth
On or Off
Norml, Key, Ignre, On, Stlth
Description
Sets LCD contrast. Use keys on 5-way
pushbutton pad.
Enters sub menu to set Welcome Message text
display.
SEL
Press
to send data using clone mode
Controls the ALERT LED and Audible Alarm
behavior. Both allows the LED and Tone. Tone
allows the audible alarm only. Light allows the LED
only. Off deactivates the ALERT LED and Audible
Alarm feature.
Controls all radio beeps.
Controls key beeps.
Controls the backlight operation.
uses the backlight key on the keypad.
the backlight when any key is pressed. Ignore
activates the backlight when a key is pressed, and
that keyʼs normal function is ignored if the backlight
is off when it is pressed. On causes the backlight to
Stlth
remain on all the time.
backlight.
ENT
to
Norml
(Normal)
Key
activates
(Steath) disables the
100
Advertisement
