Advertisement
increased priority is given to objects that have their Priority
mode set to ON.
Turning Object Priority On or Off
Priority for CONV and TGRP objects can be toggled on or off
using the following methods:
Press the
is active. The plD indicator in the object display will show p for
Object Priority Off, and P for Object Priority On.
Browse to an object in Manual Mode or PGM mode, then press
the
in the object display will show p for Object Priority Off, and P for
Object Priority On.
Browse to an object in PGM mode. Press the EDIT, then CURR
softkeys. Use the key to scroll to the Priority setting. Use
the or keys to toggle Priority On or Off.
When creating a new object, before saving the object scroll to
the Priority setting. Use the or keys to toggle
Priority On or Off
Turning Priority Scan Mode On or Off
While the radio is scanning, press
Priority Scan On or Off. Priority Scan status is shown in the man
Scanning status display. PRI indicates that Priority Scan mode is
on, and pri indicates that Priority Scan mode is off.
CONV Priority Scan
When Object Priority is set to Yes for one or more CONV objects,
the scanner will sample the CONV objects for activity periodically
while scanning and monitoring other objects.
This sampling will cause a brief muting of received audio when it
occurs while another object is active.
The more CONV objects are set for Priority, the longer this audio
muting will be, since it takes a certain amount of time to sample
each Priority CONV object for activity.
TGRP Priority Scan
When Object Priority is set to Yes for one or more TGRP objects,
the scanner will give those TGRPs priority over other TGRPs
while checking a particular trunking system for activity. TGRPs
PSR-500 User Manual
Page
PRI
key when the scanner stops on the object while it
PRI
key to toggle Object Priority on or off. The plD indicator
.
FUNC
PRI
, then
to toggle
69
Advertisement
