Advertisement
GLOB
Parameter
Light Area
Light Secs
Battery
Lo Batt
Alert
Battery Info
Charge Time
Atten Mode
Global Atten
Clear Hits
Hit Counts
Dflt
ScanList
Priority
WxPri
Scan Lists
SRCH L/Outs
Clear FAV
Memory Info
EXPERT BELOW
Tune LED
PSR-500 User Manual
Page
Options
Both, LCD, Keybd
1-99 seconds
NiMH, Alkaline or NiCad
0-60 seconds
SEL
0-99
Global or Normal
On or Off
SEL
Yes or No
0-22
On or Off
On or Off
SEL
SEL
SEL
SEL
On or Off
Description
Controls what area is illuminated when the
Both
backlight is on.
illuminates the LCD and the
LCD
keypad,
illuminates the display only.
(Keyboard) illuminates the keypad only.
Controls the amount of time the backlight remains
on for Normal, Key and Ignore light modes
Loads low battery profile for each different battery
type.
Controls critical battery audible alert. 0=off.
Displays current battery voltage, DAC value and
charge time remaining if battery is charging.
Battery charge time in hours. 0=charger off. The
battery charger is timer based and charges at a
current rate of 150 mA. The charger is disabled
when BATTERY is set to Alkaline. A default charge
time of 9 hours is used for NiCAD batteries, and 16
hours for NiMH batteries.
The attenuator reduces the amount of signal at the
receiver input. This helps reduce interference from
strong nearby transmitters. Global attenuator mode
applies attenuation radio-wide, regardless of
individual object settings. In Normal attenuator
mode, the attenuator follows the individual object
attenuator setting.
When the ATTEN mode is set to Global, this
controls whether the Global attenuator is on or off.
SEL
Press
to clear all hit counters.
Turns the hit counter feature on or off.
Sets default destination Scan Lists for new objects
and CONV Stor from Searches, Spectrum Sweeper
and Tune. Use 1-20 for "normal" Scan Lists 1-20.
Use 0 for the "ns" (not scanned) Scan List (no Scan
List mappings are specified). Use 21 for the FAV
Scan List. Use 22 for the SKYWARN Scan List.
Turns Priority Scan On or Off. Priority Scan can
also be toggled by pressing
scanning.
Toggles Weather Priority Mode on or of. Also
WX
accessed by pressing
, then
Enters sub menu for Scan List settings and status
Enters sub menu for review, editing or deletion of
search lockout frequencies
SEL
Press
to clear the Favorites Scan List.
SEL
Press
to see the current memory usage.
Activates Signal Strength driven LED when in
TUNE mode.
Keybd
FUNC PRI
while
PRI
101
Advertisement
