Advertisement
TSYS
Parameter
Dwell
Digital AGC
Supertrack
Multi-Site
Threshold Hi
Threshold Lo
T Tables
Fleet Map
PSR-500 User Manual
Page
Options
0-200 x 100 mS
On or Off
On or Off
Off, Roam or Stat
(Stationary)
1-99
1-99
Normal, Splinter, Custom
SEL
Description
Sets the amount of time the scanner dwells on a
Motorola, P25 or EDACS system control channel
for activity on programmed talkgroups. Use 0 for
automatic mode, which uses control channel
information to determine when all current talkgroup
information has been broadcast by the system.
Controls Digital AGC function for the TSYS
Alternative DSP decoding algorithm. May help
reception on some systems.
Used with networked Motorola and P25 trunked
radio systems. When Multi-Site=Off, the scanner
will find the first usable control channel in the
control channel list and use it to track the system.
When Multi-Site=ROAM, the scanner will always
attempt to lock on to control channels where the
decoding quality is greater than Threshold Hi, and
will search for new control channels when the
decoding quality of a control channel drops below
Threshold Lo, and, if no control channels are
available that meet the Threshold Hi criteria, the
scanner will seek the best control channel to use,
and continue checking periodically for a new control
channel that meets the Threshold Hi criteria. When
Multi-Site=STAT, the scanner will track the system
using every usable control channel in the control
channel list.
Available When Multi-Site is set to ROAM. Sets the
control channel decode % threshold for a site to be
considered good when looking for a new site.
Available When Multi-Site is set to ROAM. Sets the
control channel decode % threshold for a site to be
considered out of range, which will begin the
process of looking for a new site.
For Motorola and P25 systems only - sets custom
channel tables. Use ,to select option, press
SEL
on Custom to enter custom table information
For Motorola Type I systems only - sets fleet map
108
Advertisement
