Advertisement
LMIT Parameter
Delay
Delay Time
Zeromatic
Search Dir
Hit Count
PSR-500 User Manual
Page
Options
Controls whether a Delay is used to wait for reply
On or Off
traffic after a transmission is received during the
LMIT search.
Sets the amount of time (in 100 millisecond
1-200
intervals) for the wait for reply delay if Delay is On,
e.g., 20=2 seconds.
When on, enhances the scannerʼs ability to lock on
On or Off
to the actual center frequency of a search hit
instead of an adjacent frequency.
Sets search direction used when LMIT object is
Up or Down
active.
Increments each time a transmission is received on
Numeric value
the SWPR object. Global "Hit Counts" must be set
to ON. Press the
Description
Dflt
softkey to reset to 0.
110
Advertisement
