Stdma Mode; Figure 3-12 Stdma Page - Comtech EF Data Vipersat SLM-5650A User Manual

V i p e r s a t C o n f i g u r a t io n
To maintain any parameter changes in flash memory, select Save from the Main
Menu bar.

STDMA Mode

The STDMA parameters for this SLM-5650A are accessed by selecting
STDMA from the Vipersat submenu.
The fields in the STDMA configuration page will vary depending on the func-
tion the target SLM-5650A performs in the network. The page shown in
figure 3-12 is from an SLM-5650A serving as a Hub in the network.
Figure 3-12
STDMA Page (Hub, Dynamic Cycle mode)
C h a p t e r 3 - U s i n g t h e W e b S e r ve r I n t e r f a c e ( W S I ) 3-13