Set The Ip Addressing; Figure 2-5 Lan Interface Page - Comtech EF Data Vipersat SLM-5650A User Manual

3.

Set the IP Addressing

1.
2.
C h a p t e r 2 - Q u i c k S t a r t C o n f i g u r a t i o n
Vipersat networks. For networks that call for BPM, see the section
"Routing Mode" on page 3-6.
Save the settings to flash by selecting Save from the Main Menu bar.
From the LAN submenu, select Interface to open the LAN Interface page
(figure 2-5).
The MAC Address is displayed as a read-only field.
Select Single or Dual IP Addressing Mode (default=Single).
Figure 2-5 LAN Interface Page
I n i t i a l C o n f i g u r a t io n
2-7