Chapter 3 - Using The Web Server Interface (Wsi); Appendix A - Network Addressing; Appendix B - Automatic Switching; Appendix C - Dynamic Power Control1-2 - Comtech EF Data Vipersat SLM-5650A User Manual

H o w t o U s e T h i s M a n u a l
Chapter 3 — Using the Web Server Interface (WSI)
Describes the use of the Web Page for configuring and monitoring the SLM-
5650A in a Vipersat network. Each HTTP screen is presented along with a
detailed description and related commands.
Appendix A — Network Addressing
Supplemental reference information on binary math and network addressing to
assist with integrating the SLM-5650A into a Vipersat network.
Appendix B — Automatic Switching
Supplemental reference information on the Vipersat feature that provides Load
switching (response to network traffic load), and Entry Channel Mode switch-
ing functions.
Appendix C — Dynamic Power Control
A description of Vipersat's DPC and its relationship to a SLM-5650A configu-
ration.
Appendix D — Glossary
A glossary of terms that pertain to Vipersat satellite network technology.

Conventions and References

The following conventions are utilized in this manual to assist the reader:
1-2
Note: Provides important information relevant to the accompanying
NOTE
text.
Tip: Provides complementary information that facilitates the
associated actions or instructions.
Caution: Explanatory text that notifies the reader of possible
consequences of an action.
Warning: Provides precautionary text that describes a potentially
hazardous situation. Failure to take or avoid a specified
action may result in damage to equipment.
V i p e r s a t S L M - 5 6 5 0 A U s e r G u i d e