Dynamic Routing With Ospf; Figure 2-6 Routes Table Page (Hub) - Comtech EF Data Vipersat SLM-5650A User Manual

I n i t i a l C o n f i gu r a t i o n
3.
4.
5.

Dynamic Routing with OSPF

For networks that will utilize the Vipersat OSPF (Open Shortest Path First)
feature for dynamic routing, including SOTM roaming applications, additional
routing configuration is required. See the section "Dynamic Routing" on
page 3-40.
2-10
If this Hub unit is providing the TDM outbound, a route statement or
statements defining satellite communications with the Remote units must
be entered as well, as illustrated in the figure. One recommended option is
to enter a single super-route that will handle satellite communications with
all of the remote subnets.
Figure 2-6
Click the Add Entry button.
Continue to add entries until all desired routes are entered.
Save the settings to flash by selecting Save from the Main Menu bar.
Routes Table Page (Hub)
V i p e r s a t S L M - 5 6 5 0 A U s e r G u i d e